Improving the V911 Fast Foward Flight NEW V911 Template

The V911 it’s a bit lazy flying forward…. A good idea to improve the fast forward flight involves changing the CG putting the battery more closer to the nose, but if you don’t want to modify the CG you can try my new mix. The idea it’s to put more thrust on the main rotor  when you push the elevator stick. With the stock program when you push the elevator stick the main blades go down a few rpm so the heli goes forward and lose some altitude, with my program you will compensate that effect.

The program has been made with Eepe and runs on Er9x and it  has not  been tested on Open9x

Here it’s the Mix section:

Mixers

CH01   +100%AIL
* +100%CH6

CH02   +100%ELE
* +100%CH6

CH03   +125%THR Switch(ID0) Curve(c1)
                   +6%ELE Switch(ELE)                               
                +10%ELE Switch(GEA)
R +125%THR Switch(!ID0) Curve(c2)
R -100%HALF Switch(THR)

CH04   +100%RUD
* +100%CH5

CH05 R +50%P1 Offset(100%)

CH06 R +50%P3 Offset(100%)

As you can see above the ELE switch puts a 6% more thrust when activated and the GEA puts 10%. You can try it and adjust yourself to your needs, the trick it’s to maintain the forward flight without making the heli going up due the increase of thrust. Try different values and find the perfect one. If you increase the value a lot the heli goes up quickly so try to use 1% increments when trimming.

Try and comment 🙂

Download Template