Want to take out the slop? This kit it’s the solution (thanks John for giving me the oportunity to test the kit )
KZALASKA sells this kit for the MCPx but since MCPx and the V922 have a lot of parts in common they could be used whitout mod. anything.
It takes only a few minutes to install, you get 13 O-Rings (Silicone) just for 3,50$.
I’ve installed them into my V922 and the results are great!, more control on stick movements,They take out the play at the ball joints reducing vibrations and give smoother stick inputs
Here are the pictures…:
I have not used the skids O-Rings because I’ve found another use for ’em… Take the slop out on my V911 !
If you own a V911 you’ve noticed that it has a big “pendulum” effect, using the O-Rings that effect will be reduced a lot, another good mod to reduce the effect it’s moving the battery forward to move the CG.
Take a look at www.kzalaska.com for more pictures.
O-ring kit takes the slop out of the blade MCPX’s Head Upgraded Dampners improve the blade dampening between the Blade Grips and the Rotor Head Adds GRIPTION to your skids so you don’t slide much while spooling up on the ground
3ea 002 silicone O-rings for the servo links
4ea 001 silicone O-rings for the rotor links
2ea 003 black buna rubber O-rings for the dampners
4ea 002 black buna rubber O-rings for the skids